Configuring Untangle to work with ESX in Bridged Mode
之前試半天都不會通，原來是要將ESX的vSwitch promiscuous mode改為Accept才行。The virtual switches that the Untangle VM are connected to need to be set to ALLOW promiscuous mode.
On the Configuration tab of the ESX box, select Networking and then the properties of the vSwitch:
Select the vSwitch and click Edit:
http://alittlestrange.com/tfoa/files/2009/09/image.png
Click on the Security tab and change Promiscuous Mode to Accept:
http://alittlestrange.com/tfoa/files/2009/09/image_thumb1.png
Click OK and Close
Repeat for all other vSwitch’s attached to Untangle VM.
Reference: http://alittlestrange.com/tfoa/2008/12/10/configuring-untangle-to-work-with-esx-in-bridged-mode/
頁:
[1]